HM4X4
Cod. 5366
In Stock

Pair of rear shock absorbers for Suzuki Jimny from 2018 standard height

€260.00
Add to cart

Pair of rear shocks Suzuki Jimny from 2018 standard height, totally Made in Italy.

Our shock absorbers are manufactured with steel tubes for mechanical use, internally lapped, phosphated to prevent corrosion and painted with epoxy powders, the result is a product that is not affected by atmospheric agents and that does not paint.

The bushings present in the number of two for each eyelet, are in polyurethane, therefore very resistant to deformation and wear.

All components are sintered for maximum control over the calibration and the seals are in graphite Teflon to improve smoothness and silence.

In the shock absorber there is a first internal limit switch in extension, resistant up to 5000kg, and a second polyurethane limit switch which slows down the last 10mm of stroke to avoid excessive stress on six supports to the frame; they can be used as an excursion limit for the axle.

If it is necessary to customize the recalibrations to meet particular needs (travel in the desert, competitions, towing trolleys, prevalent use on snow, etc.) we offer the first free personalized calibration within the first year of purchase.

ROTHEN oil with a high viscosity index is used, which guarantees the maintenance of the calibration up to 200° C, therefore these shock absorbers of the new Jimny are also suitable for heavy use and raids in the desert.

Log in to view the file