Heavy Duty transmission shaft produced in Italy by a specialized company, exclusively for HM4x4.Available for all Suzuki Samurai/Sj models.When ordering, select the desired size; usually 4x8mm for all models and 4x10mm for Canadian model, we recommend checking before proceeding to order.Item normally ready for delivery.
This particular shaft, designed to eliminate any vibration and any danger of breakage, is built by making the following improvements to the standard shafts: sliding joint with grease nipple, with increased diameter and length, 35mm diameter against the 27mm of the original, length 14cm against the 9cm of the original, this allows a greater extraction, ideal for raised structures, avoids the insertion of extensions eliminating every form of vibration; oversized and standardized universal joints, which can therefore be purchased from every spare part dealer, equipped with grease nipple, with a working angle of 10° higher than the original; high quality forged flanges that allow an inclination of the u-joints higher than the standard shafts allowing their use even with raised structures; tube with increased diameter, 60mm against the 50mm of the original, carefully balanced to avoid any form of vibration; sliding up to 10cm, with metal protection cover with protection o-ring, it allows to have a slide protection from damages caused by stones, sand and the like and protects the slide from dirt. Assembly: easyBlack colourOther necessary changes: none.
