HM4X4
Cod. 5063
In Stock

Front differential lock Jeep Wrangler JK

€900.00
Add to cart

This front differential lock is meant to be installed on the Jeep Wrangler JK.

From the drop-down menu you can choose the Rubicon or Non Rubicon model, the differential, Dana 44 for Rubicon model or Dana 30 for other models, the spline differential and the final ratio to the axle.

The kit includes the differential lock, the solenoid valve, the air fittings and buttons for the electric actuation of the block.

The great advantage of this system is represented by the fact that the vehicle circulates with the free differential in road traffic, thus avoiding premature wear of the wheels or the risk of a sudden engagement of the block.

Off-road, when the situation requires it, the lock can be activated, 100% effective, in a tenth of a second simply by pressing a button, activation and deactivation with the vehicle stopped.

This ARB block is to be purchased in combination with a compressor capable of operating the block.

Contact us for any doubts about the model of the diff lock to be purchased.

ARB LOCKER JEEP WRANGLER JK

How the ARB Air Locker works: the compressor (not included) releases the pressure necessary to lock the differential and is usually installed in a suitable position inside the engine compartment.

The compressor is switched on automatically and is used to keep the pressure necessary to engage the differential lock constant.

The switches, which can be fixed on the dashboard, allow the locking to be activated and deactivated.

The insertion can also take place with the vehicle running thanks to the type of annular piston applied to the differential but a reduced speed is recommended.

When the device is deactivated, the compressed air comes out of the solenoid valve and small springs open the safety ring, thus freeing the differential.

The assembly does not present major difficulties as it works on the original axles by replacing only the differential housing
Log in to view the file