HM4X4
Cod. 5149
In Stock

Polyurethane caster kit Suzuki jimny 2018

€100.00
Add to cart

Caster kit Suzuki Jimny 2018

Kit consists of the 8 polyurethane bushings top quality with honeycomb structure and 4 eccentric bushing galvanized steel C45. 

The kit replaces all the bushes of the front radius arm and the deck side and 'installed either with original radius arm and all aftermarket.

They are recommended for structures from +5cm to +8cm as the central eccentric bushings correct the caster anglevaried response to higher and bring him back to the standard value by improving driveability on road or off-road. 

This innovative type of highly resilient silent-blocks with a honeycomb structure gives it a high capacity 'deformation maintaining an unchanged structure of the bush, the air pockets trapped inside the same bushing help isolate strut from the frame giving a comfort that no another type of bushes can 'give doing at the same time increase mobility of any type of structure. 

The honeycomb structure was obtained by removing the material in some areas in which the bushing is not stressed creating small arches that support the double wall of each bushing, this It has permission to use the most valuable material while maintaining the low price. 

The kit is made in Italy with polyurethane produced by the renowned company API, the original rubber bushings or the classic polyurethane, multi-skin are more resistant and help to increase the softness and buoyancy stability of the vehicle, either with the original set-up that raised! 

This will decrease bushing kit drastically vibration on the steering that plagues all jimny suzuki whilst not restricting mobility of the suspension as is the case with most common polyurethane kit, the high quality of the material used and designed specifically for this use makes these bushings very long-lived in the time even with heavy use of the medium and high performing assets. 

Being composed of three separate pieces fitting and easier than the bushings constructed in one piece as original, in support detailed assembly instructions.

Log in to view the file