Lift suspension kit Suzuki Vitara +2" step 1

This kit entirely made in Italy, raises 5cm compared to the original suspension.

This kit is the basis to build a high performance trim adding other accessories in order to increase the excursion and driving precision, a good entry level kit with top quality materials.

The springs included in the kit are of progressive type with variable pitch.
A spring with variable pitch during compression progressively hardens to obtain an extremely soft, comfortable and able to copy the ground but very stable on the road.

The shock absorbers are entirely designed and made in Italy by a leading company in the sector, in addition to being painted with epoxy powders they are previously phosphated to prevent corrosion, so they are not affected by atmospheric agents and do not peel off.

They have a 50mm body and 16mm stem, they are bitubo type with internal return stop on rubber resistant up to 5000kg, can be reviewed and recalibrated according to your needs.

The shock absorbers provide for correction of the camber, the hubs are inclined by 1.75° so as to bring the camber angle to the correct value for a rise of 5cm.

The set-up is available with specific calibration for gasoline or diesel engine, if a winch or heavy-duty bumper with a weight of more than 20kg is installed, springs with a suitable load will be provided, in the drop down menus at the top you can the personalized configuration of the structure.