Pair of rear springs Suzuki Grand Vitara +2 inch

Pair of rear springs for Suzuki Grand Vitara, manufactured from 2006.

This pair of rear springs are made in Italy with high quality 52SiCrNi5 steel in compliance with the UNI EN 10089 standard, they are longer than the original ones, reinforced with a progressive effect.

These springs raise the vehicle by 5cm compared to the original set-up and fit without any modification on all Suzuki Grand Vitara since 2006.

The technical data sheet explains how a variable pitch spring works.

The springs are built in Italy by a company certified by TÜV according to the UNI/ISO 9001: 2015 standard.

The progressive springs, unlike the traditional ones, have a variable pitch, i.e. the distance between the coils is not constant but varies along its length, this allows to control the stiffness of a spring which, for the same material and wire diameter, is given precisely from the number of turns and their pitch.

A progressive spring allows you to insert more coils compared to a traditional spring resulting much softer, the coils with variable pitch during compression harden the spring progressively thus obtaining an extremely soft, comfortable and able to copy the ground but very stable on the road.

The main off road advantages of a progressive spring:

greater ability to copy the terrain;
greater excursion with the same length compared to a traditional spring;
very stable in the lateral passages as it stiffens when squeezed;
greater absorption of sudden obstacles, as by gradually stiffening it brakes any obstacle (boulders, roots, etc.) without reaching a buffer.

The main advantages on the road of a progressive spring:

very stable on fast sections;
much more comfortable than a traditional spring thanks to the high number of turns;
it minimizes roll when cornering as it stiffens progressively when squeezed.

My offroad vehicle

Off road accessories

Pair of rear springs Suzuki Grand Vitara +2 inch

Pair of rear springs Suzuki Grand Vitara +2 inch

Related products