Kit consisting of two rear shock absorbers, with attacks identical to the originals, which can be installed on all Jeep Wrangler JK.
They have a 60mm body and a 20mm stem, they are of the double pipe type with internal return stop on rubber resistant up to 5000kg, which can also be used as an excursion limit for the axle, they can be revised and recalibrated according to your needs.
From the drop-down menu at the top right, choose the desired shock absorber length.
The shock absorber that we offer is entirely designed and built by us at HM4X4. In addition to being painted with epoxy powders, it is previously PHOSPHATED to prevent corrosion, therefore it is not affected by atmospheric agents and does not paint.
It is a shock absorber with increased stroke while maintaining a very compact body, thanks to the use of a piston and high quality valves with large diameter but low height.
Inside the shock absorber there is an internal return stop resistant up to 3000kg and an air chamber useful to absorb the changes in oil volume making it suitable even for very intense uses.
ROTHEN oil resistant up to 200° C is used, therefore these shock absorbers are also suitable for heavy use and raids in the desert.
They are calibrated in compression like the originals to promote comfort, but braked in extension to reduce the hopping of the vehicle.
This calibration is designed to best adapt to the Italian off-road vehicle and is compatible with any type of set-up; however, when ordering, the desired one can be chosen without extra charge.