HM4X4
Cod. 9321
In Stock

Coilover spring 300 mm

€120.00
Add to cart

Coilover spring

High-quality coilover spring, made in Italy from 52SiCrNi5 nickel-chrome steel according to EN 10089 1.7117.

The proposed spring has a diameter of 64mm, which is the size usually used for shock absorbers with a 2" (50mm) body; the first and last coils are milled to perfectly match the coilover rings.

The height of the unloaded spring is 300mm, the load can be chosen through the drop-down menu, you can choose the load from 100Lb/inch to 300Lb/inch.

To make the choice consider that, the 100lb/inch load corresponds to about 1.8 kg/mm i.e., the spring lowers one mm for every 1.8kg of applied load, so schematically:

  • the spring with 100LB load sags 1mm for every 1.8kg;
  • the spring with 150LB load lowers 1mm for every 2.7kg;
  • the spring with 200LB load lowers 1mm every 3.6kg;
  • the spring with 250LB load lowers 1mm every 4.5kg;
  • the spring with 300LB load lowers 1mm every 5.4kg.

Normally springs are in stock but considering the very wide range if you want to be sure of actual availability or for advice on load selection please contact us.


Log in to view the file