HM4X4
Cod. 0225
In Stock

Pair of front reinforced shocks Suzuki Vitara +4cm with correction camber

€250.00
Add to cart
Kit consisting of 2 front shock absorbers for Suzuki Vitara, of any year and motorization, + 4cm double-bitube type with internal retaining stop on rubber resistant up to 5000kg, usable as a limit of rear suspension, can be reviewed and recalibrated according to your needs.

The shock we proposed, entirely designed and made in Italy by a leading company in the industry, in addition to being painted with epoxy powders is previously PHOSPHATE to prevent corrosion, so it is not affected by weathering and does not clear.

With the installation of these shock absorbers the hubs are inclined by 1.75° so as to bring the camber angle back to the correct one for a 4cm rise.
The study on "Maximum Active Surface", extensively tested in the Italian XTC Championship, allowed us to obtain a shock absorber with increased stroke, while maintaining a very compact body using a piston and high quality valves with large diameter but low height.

Inside the shock absorber there is an internal return stop resistant up to 5000kg and an air chamber useful to absorb oil volume variations making it suitable also for very intense uses.

ROTHEN oil is used, resistant up to 200° C, so these shock absorbers are also suitable for heavy use and raids in the desert. 

The proposed shock absorber is calibrated in compression like the originals to favor comfort, but braked in extension to reduce the hopping of the vehicle, this calibration is designed to best adapt to the Italian off-road vehicle and is compatible with any type of set-up, in phase d however, the desired calibration can be chosen without a surcharge.


With these shock absorbers it is not necessary to install the camber correction kit as they correct the camber directly on the supports, for rises above 5cm it is possible to further correct the camber with the special kit.
Log in to view the file