Our pair of shock absorbers for Suzuki Grand Vitara +8 cm is produced in all its parts in Italy.Each shock absorber is made with internally lapped mechanical steel tube, phosphated and painted with epoxy powders to prevent corrosion and not be affected by atmospheric agents.Each shock absorber has polyurethane bushings, very resistant to deformation and wear.All components are sintered for maximum control over the calibration and the seals are in graphite Teflon to improve smoothness and silence.Each shock absorber is calibrated in compression like the originals to promote comfort, but more braked in extension to reduce the hopping of the vehicle. This calibration is designed to best adapt to the Italian off-road vehicle and is compatible with any type of set-up. However, when ordering, the desired one can be chosen at no extra charge.Each shock absorber can be recalibrated and revised in its entirety. In the first year after purchase, recalibration, on your request, is carried out free of charge in order to adapt the shock absorber to the use you make of the vehicle.Each shock absorber inside has a first internal limit switch in extension resistant up to 5000 kg, and a second polyurethane limit switch that slows down the last 10mm of stroke to avoid excessive stress on the supports on the frame. It can be used as an excursion limit for the bridge.In the manufacture of each shock absorber, ROTHEN oil with a high viscosity index is used, which guarantees the maintenance of the calibration up to 200 ° C, therefore this Suzuki Grand Vitara shock absorber is also suitable for heavy duty and desert raids.In the section dedicated to technical info you will find the measures and the technical characteristics.